＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ A syringe-type extruder for 1/12 scale miniature pasta. The final size may slightly vary depending on the shrinkage rate of the clay after drying. 【Nozzle Number | Size】 #1 Macaroni = Φ0.75mm x 2 strands #2 Penne = Φ1.1mm x 2 strands #3 Fusilli = Φ1.15mm x 2 strands *The syringe color may differ from the one shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ ** Precautions for Use ** This squeezing tool is recommended for use with clay that allows its softness to be adjusted using water. If you plan to use your own clay, please ensure that it can be adjusted with water. Resin clay that hardens by baking, oven clay, and similar types can be used if kept as soft as possible. However, please note that it is not recommended to use them, as the nozzle may detach or the clay may not be squeezed out properly. For additional maintenance and usage instructions, please refer to the included manual. Please be aware that the actual product color may slightly differ from what you see on your computer monitor or mobile screen. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ 1/12 scale cream piping tool for miniature cupcakes. It can be used for miniature cupcakes with a diameter of approximately 4.5mm to 5.5mm. The final size may slightly vary depending on the shrinkage rate of the clay after drying. Russian Nozzles Set: 1 size, 6 pieces included. *Note: The color of the syringe may differ from the photos. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ ** Precautions for Use ** This squeezing tool is recommended for use with clay that allows its softness to be adjusted using water. If you plan to use your own clay, please ensure that it can be adjusted with water. Resin clay that hardens by baking, oven clay, and similar types can be used if kept as soft as possible. However, please note that it is not recommended to use them, as the nozzle may detach or the clay may not be squeezed out properly. For additional maintenance and usage instructions, please refer to the included manual. Please be aware that the actual product color may slightly differ from what you see on your computer monitor or mobile screen. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ A piping tool for 1/12 scale miniatures. The final size may slightly vary depending on the shrinkage rate of the clay after drying. 【Round piping tip: Sizes #1 to #6】 #1 = Approx. Φ 0.33mm, 1 pc. #2 = Approx. Φ 0.42mm, 1 pc. #3 = Approx. Φ 0.50mm, 1 pc. #4 = Approx. Φ 0.67mm, 1 pc. #5 = Approx. Φ 0.75mm, 1 pc. #6 = Approx. Φ 0.83mm, 1 pc. *The syringe color may differ from the one shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ ** Precautions for Use ** This squeezing tool is recommended for use with clay that allows its softness to be adjusted using water. If you plan to use your own clay, please ensure that it can be adjusted with water. Resin clay that hardens by baking, oven clay, and similar types can be used if kept as soft as possible. However, please note that it is not recommended to use them, as the nozzle may detach or the clay may not be squeezed out properly. For additional maintenance and usage instructions, please refer to the included manual. Please be aware that the actual product color may slightly differ from what you see on your computer monitor or mobile screen. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ A piping tool for 1/12 scale miniatures. The final size may slightly vary depending on the shrinkage rate of the clay after drying. 【Round piping tip: Sizes #7 to #12】 #7 = Approx. Φ 0.92mm, 1 pc. #8 = Approx. Φ 1.00mm, 1 pc. #9 = Approx. Φ 1.13mm, 1 pc. #10 = Approx. Φ 1.21mm, 1 pc. #11 = Approx. Φ 1.29mm, 1 pc. #12 = Approx. Φ 1.38mm, 1 pc. *The syringe color may differ from the one shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ ** Precautions for Use ** This squeezing tool is recommended for use with clay that allows its softness to be adjusted using water. If you plan to use your own clay, please ensure that it can be adjusted with water. Resin clay that hardens by baking, oven clay, and similar types can be used if kept as soft as possible. However, please note that it is not recommended to use them, as the nozzle may detach or the clay may not be squeezed out properly. For additional maintenance and usage instructions, please refer to the included manual. Please be aware that the actual product color may slightly differ from what you see on your computer monitor or mobile screen. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ A piping tool for 1/12 scale miniatures. The final size may slightly vary depending on the shrinkage rate of the clay after drying. 【Noodle piping tips, Round Noodle: Sizes #1 to #6】 #1 = approx. Φ0.14mm x 1 pc. #2 = approx. Φ0.17mm x 1 pc. #3 = approx. Φ0.20mm x 1 pc. #4 = approx. Φ0.25mm x 1 pc. #5 = approx. Φ0.31mm x 1 pc. #6 = approx. Φ0.37mm x 1 pc. *The syringe color may differ from the one shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ ** Precautions for Use ** This squeezing tool is recommended for use with clay that allows its softness to be adjusted using water. If you plan to use your own clay, please ensure that it can be adjusted with water. Resin clay that hardens by baking, oven clay, and similar types can be used if kept as soft as possible. However, please note that it is not recommended to use them, as the nozzle may detach or the clay may not be squeezed out properly. For additional maintenance and usage instructions, please refer to the included manual. Please be aware that the actual product color may slightly differ from what you see on your computer monitor or mobile screen. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ A piping tool for 1/12 scale miniatures. The final size may slightly vary depending on the shrinkage rate of the clay after drying. 【Noodle piping tips, Flat Noodle, Square Shape: Sizes #1 to #6】 #1 = Approx. width 0.18mm, 1 pc. #2 = Approx. width 0.22mm, 1 pc. #3 = Approx. width 0.25mm, 1 pc. #4 = Approx. width 0.33mm, 1 pc. #5 = Approx. width 0.42mm, 1 pc. #6 = Approx. width 0.70mm, 1 pc. *The syringe color may differ from the one shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ ** Precautions for Use ** This squeezing tool is recommended for use with clay that allows its softness to be adjusted using water. If you plan to use your own clay, please ensure that it can be adjusted with water. Resin clay that hardens by baking, oven clay, and similar types can be used if kept as soft as possible. However, please note that it is not recommended to use them, as the nozzle may detach or the clay may not be squeezed out properly. For additional maintenance and usage instructions, please refer to the included manual. Please be aware that the actual product color may slightly differ from what you see on your computer monitor or mobile screen. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ A piping tool for 1/12 scale miniatures. The final size may slightly vary depending on the shrinkage rate of the clay after drying. 【Star piping tip Sizes】 Cut Number / Piping Tip Diameter 5 / 5 = 0.9mm 5 / 6 = 1.0mm 5 / 7 = 1.1mm 5 / 8 = 1.2mm 5 / 9 = 1.26mm 5 / 10 = 1.35mm Includes 1 of each type, total of 6. *The syringe color may differ from the one shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ ** Precautions for Use ** This squeezing tool is recommended for use with clay that allows its softness to be adjusted using water. If you plan to use your own clay, please ensure that it can be adjusted with water. Resin clay that hardens by baking, oven clay, and similar types can be used if kept as soft as possible. However, please note that it is not recommended to use them, as the nozzle may detach or the clay may not be squeezed out properly. For additional maintenance and usage instructions, please refer to the included manual. Please be aware that the actual product color may slightly differ from what you see on your computer monitor or mobile screen. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ A piping tool for 1/12 scale miniatures. The final size may slightly vary depending on the shrinkage rate of the clay after drying. 【6-cut star piping tip Sizes】 Cut Number / Piping Tip Diameter 6 / 5 = 0.9mm 6 / 6 = 1.0mm 6 / 7 = 1.1mm 6 / 8 = 1.2mm 6 / 9 = 1.26mm 6 / 10 = 1.35mm Includes 1 of each type, total of 6. *The syringe color may differ from the one shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ ** Precautions for Use ** This squeezing tool is recommended for use with clay that allows its softness to be adjusted using water. If you plan to use your own clay, please ensure that it can be adjusted with water. Resin clay that hardens by baking, oven clay, and similar types can be used if kept as soft as possible. However, please note that it is not recommended to use them, as the nozzle may detach or the clay may not be squeezed out properly. For additional maintenance and usage instructions, please refer to the included manual. Please be aware that the actual product color may slightly differ from what you see on your computer monitor or mobile screen. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ A piping tool for 1/12 scale miniatures. The final size may slightly vary depending on the shrinkage rate of the clay after drying. 【8-cut star piping tip Sizes】 Cut Number / Piping Tip Diameter 8 / 5 = 0.9mm 8 / 6 = 1.0mm 8 / 7 = 1.1mm 8 / 8 = 1.2mm 8 / 9 = 1.26mm 8 / 10 = 1.35mm Includes 1 of each type, total of 6. *The syringe color may differ from the one shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ ** Precautions for Use ** This squeezing tool is recommended for use with clay that allows its softness to be adjusted using water. If you plan to use your own clay, please ensure that it can be adjusted with water. Resin clay that hardens by baking, oven clay, and similar types can be used if kept as soft as possible. However, please note that it is not recommended to use them, as the nozzle may detach or the clay may not be squeezed out properly. For additional maintenance and usage instructions, please refer to the included manual. Please be aware that the actual product color may slightly differ from what you see on your computer monitor or mobile screen. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ A piping tool for 1/12 scale miniatures. The final size may slightly vary depending on the shrinkage rate of the clay after drying. 【10-cut star piping tip Sizes】 Cut Number / Piping Tip Diameter 10 / 5 = 0.9mm 10 / 6 = 1.0mm 10 / 7 = 1.1mm 10 / 8 = 1.2mm 10 / 9 = 1.26mm 10 / 10 = 1.35mm Includes 1 of each type, total of 6. *The syringe color may differ from the one shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ ** Precautions for Use ** This squeezing tool is recommended for use with clay that allows its softness to be adjusted using water. If you plan to use your own clay, please ensure that it can be adjusted with water. Resin clay that hardens by baking, oven clay, and similar types can be used if kept as soft as possible. However, please note that it is not recommended to use them, as the nozzle may detach or the clay may not be squeezed out properly. For additional maintenance and usage instructions, please refer to the included manual. Please be aware that the actual product color may slightly differ from what you see on your computer monitor or mobile screen. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ A piping tool for 1/12 scale miniatures. The final size may slightly vary depending on the shrinkage rate of the clay after drying. 【12-cut star piping tip Sizes】 Cut Number / Piping Tip Diameter 12 / 5 = 0.9mm 12 / 6 = 1.0mm 12 / 7 = 1.1mm 12 / 8 = 1.2mm 12 / 9 = 1.26mm 12 / 10 = 1.35mm Includes 1 of each type, total of 6. *The syringe color may differ from the one shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ ** Precautions for Use ** This squeezing tool is recommended for use with clay that allows its softness to be adjusted using water. If you plan to use your own clay, please ensure that it can be adjusted with water. Resin clay that hardens by baking, oven clay, and similar types can be used if kept as soft as possible. However, please note that it is not recommended to use them, as the nozzle may detach or the clay may not be squeezed out properly. For additional maintenance and usage instructions, please refer to the included manual. Please be aware that the actual product color may slightly differ from what you see on your computer monitor or mobile screen. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ A piping tool for 1/12 scale miniatures. The final size may slightly vary depending on the shrinkage rate of the clay after drying. 【Serrated piping tips】 #1 = Width 1.10 mm x 2 pcs. #2 = Width 1.75 mm x 2 pcs. #3 = Width 2.15 mm x 2 pcs. *The syringe color may differ from the one shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ ** Precautions for Use ** This squeezing tool is recommended for use with clay that allows its softness to be adjusted using water. If you plan to use your own clay, please ensure that it can be adjusted with water. Resin clay that hardens by baking, oven clay, and similar types can be used if kept as soft as possible. However, please note that it is not recommended to use them, as the nozzle may detach or the clay may not be squeezed out properly. For additional maintenance and usage instructions, please refer to the included manual. Please be aware that the actual product color may slightly differ from what you see on your computer monitor or mobile screen. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ A piping tool for 1/12 scale miniatures. The final size may slightly vary depending on the shrinkage rate of the clay after drying. 【Saint-Honore piping tip Sizes】 #1: Cut length: 1.25mm × 2 pcs. #2: Cut length: 1.65mm × 2 pcs. #3: Cut length: 2.00mm × 1 pc. #4: Cut length: 2.50mm × 1 pc. #4 has a different inner diameter from the 1/6 size 2.50mm. *The syringe color may differ from the one shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ ** Precautions for Use ** This squeezing tool is recommended for use with clay that allows its softness to be adjusted using water. If you plan to use your own clay, please ensure that it can be adjusted with water. Resin clay that hardens by baking, oven clay, and similar types can be used if kept as soft as possible. However, please note that it is not recommended to use them, as the nozzle may detach or the clay may not be squeezed out properly. For additional maintenance and usage instructions, please refer to the included manual. Please be aware that the actual product color may slightly differ from what you see on your computer monitor or mobile screen. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ A piping tool for 1/12 scale miniatures. The final size may slightly vary depending on the shrinkage rate of the clay after drying. 【Leaf piping tip Sizes】 #1 = Width 1.10mm × 3 pcs. #2 = Width 1.20mm × 3 pcs. Includes 3 of each type, total of 6. *The syringe color may differ from the one shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ ** Precautions for Use ** This squeezing tool is recommended for use with clay that allows its softness to be adjusted using water. If you plan to use your own clay, please ensure that it can be adjusted with water. Resin clay that hardens by baking, oven clay, and similar types can be used if kept as soft as possible. However, please note that it is not recommended to use them, as the nozzle may detach or the clay may not be squeezed out properly. For additional maintenance and usage instructions, please refer to the included manual. Please be aware that the actual product color may slightly differ from what you see on your computer monitor or mobile screen. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ A piping tool for 1/12 scale miniatures. The final size may slightly vary depending on the shrinkage rate of the clay after drying. 【Rose Piping Tip Sizes】 #1 = Width 1.10mm × 2 pcs. #2 = Width 1.35mm × 2 pcs. #3 = Width 1.70mm × 2 pcs. Includes 2 of each type, total of 6. *The syringe color may differ from the one shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ ** Precautions for Use ** This squeezing tool is recommended for use with clay that allows its softness to be adjusted using water. If you plan to use your own clay, please ensure that it can be adjusted with water. Resin clay that hardens by baking, oven clay, and similar types can be used if kept as soft as possible. However, please note that it is not recommended to use them, as the nozzle may detach or the clay may not be squeezed out properly. For additional maintenance and usage instructions, please refer to the included manual. Please be aware that the actual product color may slightly differ from what you see on your computer monitor or mobile screen. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ Miniature 1/12 Clay Cutter (Clay Mold) [Product Use] For resin clay (air-dry, naturally drying clay) Cookies, chocolates, coasters, other decorative items, and tiles, etc. [Clay Cutter Shapes and Sizes] * The final size may vary slightly depending on the shrinkage rate of the clay you use. Circle 1: Diameter approx. 5.0mm / 6.0mm (1 piece) Circle 2: Diameter approx. 7.5mm / 8.5mm (1 piece) Oval 1-1: Width approx. 5.0mm / 6.0mm (1 piece) Oval 1-2: Width approx. 7.5mm / 8.5mm (1 piece) Oval 2-1: Width approx. 5.0mm / 6.0mm (1 piece) Oval 2-2: Width approx. 7.5mm / 8.5mm (1 piece) Drop 1: Width approx. 5.0mm / 6.0mm (1 piece) Drop 2: Width approx. 7.5mm / 8.5mm (1 piece) Clay cutter set: Total of 8 pieces Please note that the actual color may slightly differ due to variations in computer monitors or mobile screens. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ This tool, the 'Clay Cutter,' is a mold designed for use with clay. Do not use it with food. It can be used with paper clay and resin clay (air-dry clay). For maintenance and usage instructions, please refer to the manual. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ Miniature 1/12 Clay Cutter (Clay Mold) [Product Use] For resin clay (air-dry, naturally drying clay) Cookies, chocolates, coasters, other decorative items, and tiles, etc. [Clay Cutter Shapes and Sizes] * The final size may vary slightly depending on the shrinkage rate of the clay you use. Heart 1: Width approx. 5.0mm / 6.0mm (1 piece) Heart 2: Width approx. 7.5mm / 8.5mm (1 piece) Diamond 1: Width approx. 5.0mm / 6.0mm (1 piece) Diamond 2: Width approx. 7.5mm / 8.5mm (1 piece) Spade 1: Width approx. 5.0mm / 6.0mm (1 piece) Spade 2: Width approx. 7.5mm / 8.5mm (1 piece) Clover 1: Width approx. 5.0mm / 6.0mm (1 piece) Clover 2: Width approx. 7.5mm / 8.5mm (1 piece) Clay cutters: Total 8 pieces Please note that the actual color may slightly differ due to variations in computer monitors or mobile screens. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ This tool, the 'Clay Cutter,' is a mold designed for use with clay. Do not use it with food. It can be used with paper clay and resin clay (air-dry clay). For maintenance and usage instructions, please refer to the manual. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ Miniature 1/12 Clay Cutter (Clay Mold) [Product Use] For resin clay (air-dry, naturally drying clay) Cookies, chocolates, coasters, other decorative items, and tiles, etc. [Clay Cutter Shapes and Sizes] * The final size may vary slightly depending on the shrinkage rate of the clay you use. Scallop (Round) 1-1: Diameter approx. 5.0mm / 6.0mm (1 piece) Scallop (Round) 1-2: Diameter approx. 7.5mm / 8.5mm (1 piece) Scallop (Round) 2-1: Diameter approx. 5.0mm / 6.0mm (1 piece) Scallop (Round) 2-2: Diameter approx. 7.5mm / 8.5mm (1 piece) Scallop (Round) 3-1: Diameter approx. 5.0mm / 6.0mm (1 piece) Scallop (Round) 3-2: Diameter approx. 7.5mm / 8.5mm (1 piece) Scallop (Round) 4-1: Diameter approx. 5.0mm / 6.0mm (1 piece) Scallop (Round) 4-2: Diameter approx. 7.5mm / 8.5mm (1 piece) Clay cutters: Total 8 pieces Please note that the actual color may slightly differ due to variations in computer monitors or mobile screens. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ This tool, the 'Clay Cutter,' is a mold designed for use with clay. Do not use it with food. It can be used with paper clay and resin clay (air-dry clay). For maintenance and usage instructions, please refer to the manual. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ Miniature 1/12 Clay Cutter (Clay Mold) [Product Use] For resin clay (air-dry, naturally drying clay) Cookies, chocolates, coasters, other decorative items, and tiles, etc. [Clay Cutter Shapes and Sizes] * The final size may vary slightly depending on the shrinkage rate of the clay you use. Scallop (Oval) 1-1: Width approx. 5.0mm / 6.0mm (1 piece) Scallop (Oval) 1-2: Width approx. 7.5mm / 8.5mm (1 piece) Scallop (Oval) 2-1: Width approx. 5.0mm / 6.0mm (1 piece) Scallop (Oval) 2-2: Width approx. 7.5mm / 8.5mm (1 piece) Scallop (Oval) 3-1: Width approx. 5.0mm / 6.0mm (1 piece) Scallop (Oval) 3-2: Width approx. 7.5mm / 8.5mm (1 piece) Scallop (Oval) 4-1: Width approx. 5.0mm / 6.0mm (1 piece) Scallop (Oval) 4-2: Width approx. 7.5mm / 8.5mm (1 piece) Clay cutters: Total 8 pieces Please note that the actual color may slightly differ due to variations in computer monitors or mobile screens. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ This tool, the 'Clay Cutter,' is a mold designed for use with clay. Do not use it with food. It can be used with paper clay and resin clay (air-dry clay). For maintenance and usage instructions, please refer to the manual. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ Miniature 1/12 Clay Cutter (Clay Mold) [Product Use] For resin clay (air-dry, naturally drying clay) Cookies, chocolates, coasters, other decorative items, and tiles, etc. [Clay Cutter Shapes and Sizes] * The final size may vary slightly depending on the shrinkage rate of the clay you use. Scallop (Square) 1-1: Width approx. 5.0mm / 6.0mm (1 piece) Scallop (Square) 1-2: Width approx. 7.5mm / 8.5mm (1 piece) Scallop (Square) 2-1: Width approx. 5.0mm / 6.0mm (1 piece) Scallop (Square) 2-2: Width approx. 7.5mm / 8.5mm (1 piece) Scallop (Square) 3-1: Width approx. 6.0mm / 10.0mm (1 piece) Scallop (Square) 3-2: Width approx. 7.0mm / 9.0mm (1 piece) Scallop (Square) 4-1: Width approx. 7.0mm / 11.5mm (1 piece) Scallop (Square) 4-2: Width approx. 8.0mm / 10.0mm (1 piece) Clay cutters: Total 8 pieces Please note that the actual color may slightly differ due to variations in computer monitors or mobile screens. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ This tool, the 'Clay Cutter,' is a mold designed for use with clay. Do not use it with food. It can be used with paper clay and resin clay (air-dry clay). For maintenance and usage instructions, please refer to the manual. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ Miniature 1/12 Clay Cutter (Clay Mold) [Product Use] For resin clay (air-dry, naturally drying clay) Cookies, chocolates, coasters, other decorative items, and tiles, etc. [Clay Cutter Shapes and Sizes] * The final size may vary slightly depending on the shrinkage rate of the clay you use. Star 4-1: Width approximately 5.0mm / 6.0mm (1 piece) Star 4-2: Width approximately 7.5mm / 8.5mm (1 piece) Star 5-1: Width approximately 5.0mm / 6.0mm (1 piece) Star 5-2: Width approximately 7.5mm / 8.5mm (1 piece) Star 6-1: Width approximately 5.0mm / 6.0mm (1 piece) Star 6-2: Width approximately 7.5mm / 8.5mm (1 piece) Moon 1-1: Width approximately 5.0mm / 6.0mm (1 piece) Moon 1-2: Width approximately 7.5mm / 8.5mm (1 piece) Clay cutters: Total 8 pieces Please note that the actual color may slightly differ due to variations in computer monitors or mobile screens. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ This tool, the 'Clay Cutter,' is a mold designed for use with clay. Do not use it with food. It can be used with paper clay and resin clay (air-dry clay). For maintenance and usage instructions, please refer to the manual. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ Miniature 1/12 Clay Cutter (Clay Mold) [Product Use] For resin clay (air-dry, naturally drying clay) Cookies, chocolates, coasters, other decorative items, and tiles, etc. [Clay Cutter Shapes and Sizes] * The final size may vary slightly depending on the shrinkage rate of the clay you use. Snowflake 1-1: Width approx. 5.0mm / 6.0mm (1 piece) Snowflake 1-2: Width approx. 7.5mm / 8.5mm (1 piece) Snowflake 2-1: Width approx. 5.0mm / 6.0mm (1 piece) Snowflake 2-2: Width approx. 7.5mm / 8.5mm (1 piece) Snowflake 3-1: Width approx. 5.0mm / 6.0mm (1 piece) Snowflake 3-2: Width approx. 7.5mm / 8.5mm (1 piece) Snowflake 4-1: Width approx. 5.0mm / 6.0mm (1 piece) Snowflake 4-2: Width approx. 7.5mm / 8.5mm (1 piece) Clay cutters: Total 8 pieces Please note that the actual color may slightly differ due to variations in computer monitors or mobile screens. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ This tool, the 'Clay Cutter,' is a mold designed for use with clay. Do not use it with food. It can be used with paper clay and resin clay (air-dry clay). For maintenance and usage instructions, please refer to the manual. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ Miniature 1/12 Clay Cutter (Clay Mold) [Product Use] For resin clay (air-dry, naturally drying clay) Cookies, chocolates, coasters, other decorative items, and tiles, etc. [Clay Cutter Shapes and Sizes] * The final size may vary slightly depending on the shrinkage rate of the clay you use. Square 1: Width approx. 5.0mm / 6.0mm (1 piece) Square 2: Width approx. 7.5mm / 8.5mm (1 piece) Rounded Square 1: Width approx. 5.0mm / 6.0mm (1 piece) Rounded Square 2: Width approx. 7.5mm / 8.5mm (1 piece) Triangle 1: Width approx. 5.0mm / 6.0mm (1 piece) Triangle 2: Width approx. 7.5mm / 8.5mm (1 piece) Hexagon 1: Width approx. 5.0mm / 6.0mm (1 piece) Hexagon 2: Width approx. 7.5mm / 8.5mm (1 piece) Octagon 1: Width approx. 5.0mm / 6.0mm (1 piece) Octagon 2: Width approx. 7.5mm / 8.5mm (1 piece) Clay cutters: Total 10 pieces Please note that the actual color may slightly differ due to variations in computer monitors or mobile screens. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ This tool, the 'Clay Cutter,' is a mold designed for use with clay. Do not use it with food. It can be used with paper clay and resin clay (air-dry clay). For maintenance and usage instructions, please refer to the manual. *Note: The manual can be downloaded using the QR code included with the product.

＊＊こちらのページは提携している海外代理購入者様の専用ページです。＊＊ すでに注文確定済みとなっているため、日本在住の方、 他の海外代理購入業者のご購入はできません。 誤ってご購入された場合は自動的にキャンセルとなりますのでご注意ください。 ----------------------------------------------------------- 海外代理購入者様の専用ページについて ----------------------------------------------------------- 日本国外からのご注文はご本人と代理購入者様との間でタイムラグが生じる場合があるため、こちらのページを設けさせていただいております。 日本にお住まいの方は通常の販売ページのご利用をお願いいたします。 ----------------------------------------------------------- 【Regarding Orders and Shipping from Outside Japan】 1: Products are made to order after we receive your purchase. 2: Items will be delivered to an overseas proxy purchasing agent, and from there, they will be shipped to you. 【Delivery Timeframe】 - From production to the overseas proxy purchasing agent: Currently, this process takes approximately 2 to 3 weeks. - From the overseas proxy purchasing agent to your location: The delivery time may vary depending on the country and region where you live. We apologize for any inconvenience and kindly ask for your understanding before placing an order. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ Product Description ━━━━━━━━━━━━━━━━━━━━━━━━ Miniature 1/12 Clay Cutter (Clay Mold) [Product Use] For resin clay (air-dry, naturally drying clay) Cookies, chocolates, coasters, other decorative items, and tiles, etc. [Clay Cutter Shapes and Sizes] * The final size may vary slightly depending on the shrinkage rate of the clay you use. Frame 1-1: Width approximately 5.0mm / 6.0mm (1 piece) Frame 1-2: Width approximately 7.5mm / 8.5mm (1 piece) Frame 2-1: Width approximately 7.0mm / 12.0mm (1 piece) Frame 2-2: Width approximately 8.5mm / 10.5mm (1 piece) Frame 3-1: Width approximately 7.0mm / 12.0mm (1 piece) Frame 3-2: Width approximately 8.5mm / 10.5mm (1 piece) Frame 4-1: Width approximately 7.0mm / 12.0mm (1 piece) Frame 4-2: Width approximately 8.5mm / 10.5mm (1 piece) Clay cutters: Total 8 pieces Please note that the actual color may slightly differ due to variations in computer monitors or mobile screens. ━━━━━━━━━━━━━━━━━━━━━━━━ ■ About Product Handling ━━━━━━━━━━━━━━━━━━━━━━━━ This tool, the 'Clay Cutter,' is a mold designed for use with clay. Do not use it with food. It can be used with paper clay and resin clay (air-dry clay). For maintenance and usage instructions, please refer to the manual. *Note: The manual can be downloaded using the QR code included with the product.